Toro Reelmaster 5500-D - Specifications - Details; Height-of-Cut, Weight, and Options

Recommended Height-of-Cut:
5-Blade Cutting Unit: 2.54–4.5cm (1.00–1.75 in.)
7-Blade Cutting Unit: 1.27–2.54 cm (0.5–1.0 in.)
11-Blade Cutting Unit0.95–1.9 cm (0.375–0.75 in.)
Weight:
Model 03550 1,105 kg (2,962 lbs.)*
Model 03551 1,198 kg (3,210 lbs.)*
*With 7-Blade Cutting Units, baskets & full
fluid levels
Optional Equipment:
5-Blade Cutting Unit (7 in.) Model No. 03860
7-Blade Cutting Unit (7 in.) Model No. 03861
11-Blade Cutting Unit (7 in.) Model No. 03862
Dethatching Cutting Unit Model No. 03871
Grass Basket Kit Model No. 03882
Armrest Kit Model No. 30707
4 -Wheel Drive Kit Model No. 03538
(For use with model 03550 only)
Turf Defender™ Electronic Leak
Detector Kit Model No. 03521
Precleaner Bowl Extension Tube Part No. 43-3810
(Clamp, Part No. 20-4840 required to install
extension tube)
Diagnostic ACE Too] Part No. 85-4750
Weight Kit Part No. 94-2836
High Torque Reel Motor Part No. 98-9998
Wiehle Roller Scraper Part No. 100-9908
Basket Tipper Kit Part No. 100-9945
Rear Roller Scraper Kit Part No. 100-9920
Full Roller Scraper Kit Part No. 99-8668
Shoulder Wiehle Roller Part No. 100-9911
Shoulder Wiehle Scraper Part No. 100-9913
Low Height-of-Cut Bedknife* Part No. 93-9774
Gauge Bar Assembly** Part No. 98-1852
Angle Indicator Part No. 99-3503
Backlapping Brush AssemblyPart No. TOR2991 00
Bedknife Screw Tool Part No. TOR510880
Cutting Unit Tool Kit Part No. TOR4070
Reel Drive Tool Part No. TOR4074
* For height-of-cut below 13 mm kit
**Supplied with tractor
Specifications and design subject to change
without notice.
Safety
10