BeltMaintenance................................................36
InspectingtheBelts..........................................36
ReplacingtheMowerBelt.................................36
MowerMaintenance.............................................37
BladeSafety.....................................................37
ServicingtheCuttingBlades.............................37
LevelingtheMowerDeck..................................39
RemovingtheMowerDeck...............................41
InstallingtheMower..........................................42
ReplacingtheGrassDeector..........................42
Cleaning..............................................................43
WashingtheUndersideoftheMower
Deck..............................................................43
DisposingofWaste...........................................43
Storage...................................................................44
StorageSafety..................................................44
CleaningandStorage.......................................44
StoringtheBattery............................................45
Troubleshooting......................................................46
Schematics.............................................................48
Safety
ThefollowinginstructionsarefromANSIstandard
B71.1-2017.
GeneralSafety
Thisproductiscapableofamputatinghandsand
feetandofthrowingobjects.Alwaysfollowallsafety
instructionstoavoidseriouspersonalinjury.
•Readandunderstandthecontentsofthis
Operator’sManualbeforestartingtheengine.
•Keepbystandersandchildrenaway.
•Donotallowchildrenoruntrainedpeopleto
operateorservicethemachine.Allowonlypeople
whoareresponsible,trained,familiarwiththe
instructions,andphysicallycapabletooperateor
servicethemachine.
•Donotoperatethemachineneardrop-offs,
ditches,embankments,water,orotherhazards,or
onslopesgreaterthan15°.
•Donotputyourhandsorfeetnearmoving
componentsofthemachine.
•Donotoperatethemachinewithoutallguards,
safetyswitches,andothersafetyprotective
devicesinplaceandfunctioningproperly.
•Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operator’sposition.Allowthemachinetocool
beforeservicing,adjusting,fueling,cleaning,or
storingit.
4