Toro Titan Z5200 - Safety and Instructional Decals; Decal Identification and Location; Battery Safety Symbols Explained

SPECIFICATIONS
2-2 2007 - 2008 Titan Z Service Manual
2
Hydrostatic Ground Drive System
Dimensions
Overall Width
Overall Height Weight
Without deck
With deck
'HÀHFWRU
up
'HÀHFWRU
down
48” Deck 45.5” (116cm)
48.3”
(122cm)
59.4”
(151cm)
74812 – 42.2” (107cm)
74816 – 41.8” (106cm)
645 lb. (293kg)
52” Deck 47.0” (119cm)
53.0”
(135cm)
64.2”
(163cm)
74814 – 42.2” (107cm)
74818 – 41.8” (106cm)
660 lb. (299kg)
Hydrostatic Transaxle (2) Hydro-Gear ZT2800 integrated drive system
Hydraulic Oil Type Mobil 1 15W-50 synthetic motor oil
Speeds
0 – 7.0 mph (11.3 km/hr) Forward
0 – 5.0 mph (8.0 km/hr) Reverse
Cutting Deck
48” Deck 52” Deck
Cutting Width 48” (122cm) 52” (132cm)
Discharge Side
Blade Size (3 ea.) 16.25” (41.3cm) 18.00” (45.7cm)
Blade Spindles Solid steel spindle shafts with no maintenance bearings.
Deck Drive
Electric clutch mounted on vertical engine shaft. Blades are driven by one
belt (w/self-tensioning idler) direct from engine.
Maximum turf protection is
provided by anti-scalp rollers
3 rollers (48” & 52”)
Cutting Height Adjustment
A foot deck lift lever is used to adjust the cutting height from 1-1/2” (3.8cm)
to 4-1/2” (11.4cm) in 1/2” (1.3cm) increments.