Toro Titan Z5200 - Operation and Fueling; Fuel Stabilizer and Blends Guidance; Fuel Tank Filling Safety

CHASSIS
3-52007 - 2008 Titan Z Service Manual
3
&DVWHU:KHHO$VVHPEO\5HSODFHPHQW
Caster Wheel Assembly Removal
 :LWKDGULIWSXQFKWDSRXWWKHÀDQJHEHDULQJVIURP
each side of the wheel rims (Fig. 016).
4. Remove the wheel spanner from the wheel
assembly (Fig. 015).
1. Park the machine on a level surface, disengage
the blade control (PTO) and turn the ignition key to
“OFF” to stop the engine. Remove the ignition key.
2. Raise the front of the machine high enough to permit
removing the caster wheel assembly from the caster
fork (Fig. 013).
Fig. 013 IMG-0163a
3. Remove the bolt, washers and nut securing the
caster wheel assembly to the caster fork (Fig. 014).
Fig. 014 IMG-0171
Fig. 015 IMG-0172
Fig. 016 IMG-0174a