Toro Titan Z5200 - Component Identification and Diagrams; Control Panel and Height Markings; Belt Routing Diagrams

CHASSIS
3-12007 - 2008 Titan Z Service Manual
3
0RGHO6HULDO1XPEHU,GHQWL¿FDWLRQ
/XEULFDWLRQ
The unit model and serial number plate is located on the
frame behind the seat on the left side (Fig. 001).
A. Read the instructions before
servicing or performing
maintenance.
B. Time interval.
C. Check oil level.
D. Refer to Operator’s Manual for
grease instructions.
E. Check hydraulic oil level and
refer to Operator’s manual for
further instructions.
F. Check tire pressure.
Fig. 001 IMG-0162
The unit should be greased every 25 hours, or more
often when operated in dusty, dirty, or sandy conditions.
Located under the seat is a diagram showing mainten-
ance points (Fig. 002).
Fig. 002 grease points line art
Note: Grease Type: NGLI grade #2 multi-purpose
gun grease.
 *UHDVHWKHIURQWFDVWHUZKHHOVDQGWKHLGOHU
pivots.