ENGINE
6-12007 - 2008 Titan Z Service Manual
6
Engine Replacement
Engine Removal
Note: This procedure was performed with a Briggs
& Stratton engine. Kohler engine replacement
is similar except for cable connections.
1. Remove the positive and negative battery cables
from the battery.
2. Locate the idler arm assembly on the mower deck
and pull the arm toward the rear of the machine.
Remove the mower deck belt from around the idler
pulley (Fig. 306).
Fig. 306 IMG-0432a
3. Remove the mower deck belt from around the
electric PTO clutch pulley (Fig. 307).
Fig. 307 IMG-0372
4. Unplug the wire harness plug from the PTO clutch
plug (Fig. 308).
Fig. 308 IMG-0377a
To Next Page
Loading...
