ENGINE
6-6 2007 - 2008 Titan Z Service Manual
6
Engine Installation
2. Install 4 engine mounting bolts, washers, and nuts to
secure the engine to the frame (Fig. 328).
1. Position the engine onto the frame (Fig. 327).
Fig. 327 IMG-0405a
Fig. 328 IMG-0406
22. Raise the engine off the frame (Fig. 326).
Note: For photo purposes the rear engine guards
and rear casting was removed.
Fig. 326 IMG-0403a
23. For engine service, refer to applicable Briggs &
Stratton or Kohler service publications.
3. Torque the engine mounting bolts to 200 ± 25 in-lbs
(22.6 + 2.8 Nm).
21. Remove the 4 bolts, washers, and nuts securing the
engine to the frame (Fig. 325).
Fig. 325 IMG-0397
To Next Page
Loading...
