HYDROSTATIC DRIVE SYSTEM
7-4 2007 - 2008 Titan Z Service Manual
7
2. Route the hydro drive belt around the inside of the
ULJKW¿[HGLGOHUSXOOH\)LJ
3. Route the hydro drive belt around the engine sheave
(Fig. 372).
4. Using a spring tool (Toro part number 92-5771)
release tension from the hyrdo drive idler arm and
route the hydro drive belt around the idler pulley
(Fig. 373).
Fig. 371 IMG-0445a
Fig. 372 IMG-0439a
Fig. 373 IMG-0435
5. Check the routing of the hydro drive belt, refer to the
drive belt routing diagram (Fig. 374).
Fig. 374 109-6014
To Next Page
Loading...
