HYDROSTATIC DRIVE SYSTEM
7-36 2007 - 2008 Titan Z Service Manual
7
18. Route the hydro drive belt around the left side trans-
axle hydro fan and pulley (Fig. 486).
17. Using a spring tool (Toro part number 92-5771),
install the left extension spring between the spring
anchor plate and the brake shaft assembly (Fig.
485).
Fig. 485 IMG-0527
Fig. 486 IMG-0552a
15. Install the spring anchor plate in the slot located on
the brake shaft assembly (Fig. 483).
Fig. 483 IMG-0588a
16. Install the other end of the spring anchor plate onto
the transaxle brake arm. Secure with a cotter pin
(Fig. 484).
Fig. 484 IMG-0538
To Next Page
Loading...
