CHASSIS
3-20 2007 - 2008 Titan Z Service Manual
3
11. Install two screws to secure the right hand fender to
the front of the seat box assembly (Fig. 070).
12. Install the front panel into the slots in the seat box
assembly (Fig. 071).
14. Connect the negative battery cable to the negative
battery terminal.
13. Install two screws to secure the bottom of the front
panel to the seat box assembly (Fig. 072).
Fig. 070 IMG-0204
Fig. 071 IMG-0182
Fig. 072 IMG-0180a
To Next Page
Loading...
