CHASSIS
3-452007 - 2008 Titan Z Service Manual
3
47. Position the hydro vent tank and fender support
bracket to the right rear outside corner of the seat
box assembly (Fig. 167).
49. Install the hydro fan cover (Fig. 169).
46. Install the rubber grommet in the wire harness hole
(Fig. 166).
48. Install two bolts, washers, and nuts to secure the
hydro vent tank and fender support bracket to the
seat box (Fig. 168).
Fig. 166 IMG-0343a
Fig. 167 IMG-0235
Fig. 168 IMG-0234a
Fig. 169 IMG-0233
To Next Page
Loading...
