Toro Titan Z5200 - Page 90

MOWER DECK
5-32007 - 2008 Titan Z Service Manual
5
12. Remove the spindle shaft and bearing shield (Fig.
237).
14. With a punch, drive one of the bearings out of the
housing (Fig. 239).
11. Remove the spacer on the bottom of the spindle
shaft (Fig. 236).
13. Remove the spacer from the spindle housing (Fig.
238).
Fig. 236 IMG-0623a
Fig. 237 IMG-0625a
Fig. 238 IMG-0626a
Fig. 239 IMG-0629a