MOWER DECK
5-112007 - 2008 Titan Z Service Manual
5
Idler Arm Assembly Installation
2. Position the idler pulley onto the carriage bolt and
install a nut to secure the pulley (Fig. 267).
1. Install the carriage bolt and idler bushing to the idler
arm assembly (Fig. 266).
Fig. 266 IMG-0667a
Fig. 267 IMG-0668a
3. Install a sleeve bearing into the top and bottom of
the idler arm assembly pivot (Fig. 268).
4. Install a carriage bolt and washer through the mower
deck (Fig. 269).
Fig. 268 IMG-0670a
Fig. 269 IMG-0671
To Next Page
Loading...
