Toro TurfMaster 22200 - Filling the Crankcase with Oil; Oil Level Check Procedure

G021 150
1
2
3
Figure5
1.Lowesthandleheight
setting
3.Highesthandleheight
setting
2.Middlehandleheight
setting
3.Tightenthehandleboltuntilitissnug.
4.Repeatthestepsabovefortheothersideofthe
machine.
3
FillingtheCrankcasewithOil
NoPartsRequired
Procedure
Important:Thismachinedoesnotcomewithoilinthe
engine.Beforestartingtheengine,lltheenginewith
oil.
1.Movethemachinetoalevelsurface.
2.Removethedipstickbyrotatingthecap
counterclockwiseandpullingitout.
3.Ifthecrankcaseisempty,addabout3/4ofthe
crankcasecapacityofoilintotheoil-lltube(Figure6).
Note:Max.ll:29oz.(0.85l)withoillter;22oz.
(0.65l)withoutoillter;type:SAE30orSAE10W30
weightdetergentoilwithanAPIserviceclassication
ofSF,SG,SH,SJ,SL,orhigher.
G01981 1
4
Figure6
1.Dipstick3.Addmark
2.Fullmark
4.Oil-lltube
4.Wipethedipstickcleanwithacleancloth.
5.Insertthedipstickintothellerneck,thenremoveit.
Note:Toensureanaccurateoillevelreading,install
thedipstickfully.
6.Readtheoillevelonthedipstick(Figure6).
•IftheoillevelisbelowtheAddmark,addasmall
amountofoilslowlytotheoil-lltube,thenrepeat
steps4through6untiltheoillevelisattheFull
markonthedipstick.
•IftheoillevelabovetheFullmark,drainthe
excessoiluntiltheoillevelisattheFullmarkon
thedipstick;refertoChangingtheEngineOil
(page17).
Important:Iftheoillevelinthecrankcaseis
toolowortoohighandyouruntheengine,
youmaydamagetheengine.
7.Insertthedipstickintothellerneckandrotatethecap
clockwiseuntilitistight.
7