EasyManua.ls Logo

Toro Workman HDX - Page 70

Toro Workman HDX
318 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Workman HD
Page 5 -- 6
Kohler Gasoline Engine
Fuel Tank
Figure 2
1. Fuel hose (fuel supply)
2. Fuel hose
3. Hose clamp (3 used)
4. Fuel filter
5. R--clamp
6. Flange nut
7. Flange head screw (2 used)
8. Cap
9. Fuel tank
10. Fuel tank cap
11. Fuel sender
12. Carbon cannister
13. Support tube
14. Retainer plate
15. Flange nut (2 used)
16. Washer head screw (2 used)
17. Rollover valve
18. Grommet
19. Washer head screw (2 used)
20. Fuel sender cap
21. Gasket
22. Hose clamp
23. Fuel hose (tank vent)
24. Fuel filter
25. Fuel hose
26. Vacuum check valve
27. Fuel hose
28. Fuel hose
29. Hose clamp
FRONT
RIGHT
8
7
6
9
1
5
4
3
2
17
16
15
18
10
14
13
12
11
20
21
19
22
23
24
3
3
23
25
26
27
28
29
1
175 to 200 in--lb
(20to22N--m)
TO PURGE
PORT
TO ENGINE
DANGER
Because gasoline is highly flammable, use cau-
tion when storing or handling it. Do not smoke
while filling the fuel tank. Do not fill fuel tank
while engine is running, hot or when vehicle is in
an enclosed area. Always fill fuel tank outside
and wipe up any spilled fuel before starting the
engine. Store fuel in a clean, safety--approved
container and keep cap in place. Use fuel for the
engine only; not for any other purpose.
Check Fuel Lines and Connections
Check fuel lines and connections periodically as recom-
mended in the Operator’s Manual. Check lines for dete-
rioration, damage, leaks or loose connections. Replace
hoses, clamps and connections as necessary.

Table of Contents

Other manuals for Toro Workman HDX

Related product manuals