Dear customer:
We appreciate that you have chosen this product. We assure you that you
will get the máximum satisfaction of the new acquisition for your business.
We suggest you to read carefully this manual and make sure to keep it at
hand for later consultations.
INSTALLATION GUIDE
INTRODUCTION
1. Unpacking the scale and verify that it is not damaged. If there some hurt
on the scale notify it to your authorized distributor.
2. Set the scale in a free movement and vibrations place. Verify that it is
right leved.
3. Connect the source adapter to Vac outlet.of 110VCA/220VCA, (if it is
necesary).
4. Turn on the scale and the Generald view finder shows:
5
IMPORTANT NOTE: If when doing the steps describe so far the scale
shows word “HELP” means that it was hurted and/or hited while it was
transported with causes on it a irreversible damage.
Shipping / receiving scale
To Next Page
Loading...
