1. “Alphanumeric" indicator: shows the product's weight in pounds and kilograms
when this happens, the symbol "kg" or "lb" appears in the indicator (1).
Alphanumeric indicator can show the following readings:
“Kg” or “lb” is shown when the scale is ready to weight products.
OVRLOAd is shown when there is an overweight on the scale.
NEG. is shown when there is a negative weight.
LOWbAT is shown when the battery does not have enough energy.
HELP is shown when you turn on the scale with an excessive weight.
UNLOAd is shown when the scale is turned on without the plate.
2. “Low battery" indicator: is shown when the energy of the battery is too low.
This indicator turns on to tell us that it is necessary to recharge it.
3. “Zero” indicator: these references to zero indicate that the scale is ready to
start weighting products. the zero indicator disappears when a load is placed
on the scale.
4. “NET” indicator: indicates that the "tare" function has been activated. the
readings shown correspond to the net weight.
5. “AC/DC Power supply” indicator: when the ac/dc power supply is connected
to the scale this indicator turns on.
GENERALD VIEW FINDER
7
1
2
3
4
5
Shipping / receiving scale
To Next Page
Loading...
