46
model 3000 PROFIBUS Module User’s Manual
Chapter 9 Appendix
9
(2) Select [File] - [Assign Nodes to Blocks] to register the transmit block.
Figure 9-11 Assigning nodes to blocks
In the above example, 16 words from the beginning of the PF311 cyclic transmission
transmit block (256) and 2 words from the PF311 module control information (64) of the
station (PROFI) are registered as transmit block.
Also,16 words from the beginning of the transmit block (512) of the station (dmyPF) are
registered in order to receive the cyclic data from slave from the beginning and words 0 -
1 of the station (dmyPF) are registered in order to read the PF module status.
When registration is complete, click the [Write Server] button to save the database.
To Next Page
Loading...
