Toshiba B-443 - 5 Specifications, Options, & Supplies; Specifications; Printer; Indicators and Buttons

EO1-33013
25
5. SPECIFICATIONS, OPTIONS, & SUPPLIES
5.1 Specifications
5.1.1 Printer
l Type: Direct thermal or thermal transfer
l Print speed: Selectable speeds of 1.5, 2.0 or 3.0 inches per second
l Resolution: 203 DPI (8 dots per mm)
l Font styles: Five alphanumeric fonts from 0.059"H (1.5 mm) to 0.23" (6.0 mm),
expandable vertically and horizontally up to 8x. Smooth fonts may
be downloaded from “Label Design”
l Bar codes: Code 39, Code 93, Code 128 UCC, Code 128 (Subsets A, B and
C), Codabar, Interleaved 2 of 5, EAN-8, EAN-13, UPC-A, UPC-E,
EAN and UPC with 2 or 5 digit add-on, Postnet
l 2D bar codes: Maxicode, PDF-417, DataMatrix
l Graphics: Mono PCX format
5.1.2 Indicators and Buttons
l Indicators: PWR., ON-LINE, ERR.
l Buttons: POWER, PAUSE, FEED,
Note:The functions of buttons and LEDs can be redefined by commands.
5.1.3 Communication Interface
l Communications: RS-232C(DB-9) at 2400, 4800, 9600 or 19200 baud and
standard Centronics interface.
l Character set: ANSI ASCII character set
l Word length: 7 or 8 data bits, 1 or 2 stop bits, even, odd or none parity.
l Handshaking: Xon/Xoff (on receive mode only) and DSR/DTR
l Input buffer: 60KB
5.1.4 Power Requirements
l Input voltage: Switching power, 110-240 VAC, 50-60 Hz
l Output voltage: 24 VDC
l Circuit protection: 2A maximum