Toshiba B-EP2DL Series - Page 13

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33005
2. Wireless LAN Board: B-EP700-WLAN-QM-R
2- 7
13. Mount the left side cover to the printer while fitting the tabs on the left side cover into the slots of the
printer enclosure.
B-EP4D Series: Fit the tabs A to D into the slot A’ to D’.
B-EP2D Series: Fit the tabs A to C into the slot A’ to C’.
NOTE: It is easy to mount the left side cover if you fit the tabs from the LCD side in order, then
secure the bottom side. Be careful not to catch the cable by the cover while reassembling.
Tab
A
Tab B
Tab C
Tab D
A
’
B’
C’
D’
Tab
A
Tab C
Tab B
A
’
B’
C’
Left Side Cove
r