Toshiba B-FP3D SERIES - Media Specifications and Care

15
Media Specification
NOTES:
1. The ratio of “Label length” to “Gap length” must be 3:1 or more.
2. The backing paper is approved together with label.
3. The paper width for the label includes its backing paper.
4. The backing paper to be used must be glassine paper (7K or 8K, white) or
equivalent, and must have a transmission factor of 22% or more.
Roll method: Labels facing outside
K
J
<Labels>
H
E
A
C
G
B
Feed direction
Black Mark (Reverse Side）
<Tag>
Roll method: Receipts facing outside
K
J
Feed direction
I
H
B
E
G
D
C
A
F
F
Print surface
Print surface