Toshiba B-SA4TP SERIES - Serial interface (Option); RFID (Option: B-SA704-RFID-U2-EU-R)

APPENDIX 2 INTERFACE ENGLISH VERSION EO1-33048
APPENDIX 2 INTERFACE
EA2- 4
 Serial interface (Option)
Type: RS-232C
Communication mode: Full duplex
Transmission speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 115200 bps
Synchronization: Start-stop synchronization
Start bit: 1 bit
Stop bit 1 bit, 2 bit
Data length: 7 bit, 8 bit
Parity: None, EVEN, ODD
Error detection: Parity error, Framing error, Overrun error
Protocol: Unprocedure communication
Data input code: ASCII code, European character 8 bit code, graphic 8 bit code, JIS8 code, Shift JIS
Kanji code, JIS Kanji code
Receive buffer: 1M byte
Connector:
Pin No. Signal
1 N.C
2 TD (Transmit Data)
3 RD (Received Data)
4 DSR (Data Set Ready)
5 SG (Signal Ground)
6 DTR (Data Terminal Ready)
7 CTS (Clear to Send)
8 RTS (Request to Send)
9 N.C
 RFID (Option: B-SA704-RFID-U2-EU-R)
Module: TOSHIBA TEC TRW-EUM-01 for Europe
Applicable standard: ETSI EN 300 220
Frequency range: 869.7-870.0MHz
Center frequency: 869.85MHz
Output power (ERP): Max. 5mW (Power class 7a)
Output power (Conducted): 100mW
Modulation method (RW → Tag): DSB-ASK
Modulation method (Tag → RW): Back scatter ASK
Transmission speed (RW → Tag): 40kbps
Transmission speed (Tag → RW): 40kbps
Encoding (RW → Tag): PIE
Encoding (Tag → RW): FM0
Number of channels: 1
Duty Cycle: Max. 100% (Class 4)
Carrier sensor feature: None
Environmental standard: RoHS directive
Available RFID tag types: EPC C1 Gen2
1
5
6
9