2. PRINTER SETUP
ENGLISH VERSION EO1-33062
2.6 Opening/Closing the Top Cover
E2- 6
2.6 Opening/Closing the
Top Cover (Cont.)
To hold the Top Cover at Position 2, first open the Top Cover until the
Top Cover Support goes over Position 2 (c), then close the Top Cover a
little (d) to secure the Top Cover Support.
To close the Top Cover:
1. Open the Top Cover until the Top Cover Support goes to the OPEN
position.
2. Hold the both sides of the Top Cover with your hands, and gently
close it until you hear it click.
NOTE:
e sure to close the Top Cover
completely. Failure to do this
may affect the print quality.
Top Cover Support
Position 2
Top Cover Support
OPEN Position
To Next Page
Loading...
Need help?
General
