Toshiba B-SX5T Series - Page 76

2. PRINTER SETUP ENGLISH VERSION EO1-33059
2.12 Position and Print Tone Fine Adjustment
E2-62
2.12 Position and Print
Tone Fine
Adjustment (Cont.)
After selecting a fine adjustment value, press the [PAUSE] key.
X Coordinate Fine Adjustment
NOTES:
Choose a desired value by using the
[RESTART] or [FEED] key.
P
ressing the [FEED] key one time
causes a –0.5mm change, up to
–
99.5 mm.
P
ressing the [RESTART] key one
time causes a +0.5mm change, up
to +99.5 mm.
• Example of X Coordinate Fine Adjustment
When setting –50.0 mm
Compared with “+0.0mm” position, the print position
is shifted to the left.
When setting +0.0 mm
When setting +50.0 mm
Compared with “+0.0mm” position, the print position
is shifted to the right.
<3>ADJUST SET
X ADJUST +5.0mm
[RESTART]
[FEED]
X ADJUST +99.5mm
X ADJUST +99.0mm
X ADJUST +0.0mm
X ADJUST -99.0mm
X ADJUST -99.5mm
X ADJUST -0.5mm
X ADJUST +0.5mm
ABC
Feed Direction
ABC
ABC
50.0mm
50.0mm
Top Down Printing
X
Y
Bottom First Printing
X
Y