Toshiba B-SX6T Series - Page 24

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33002
5. Serial Interface Board: B-SA704-RS-QM-R
5- 2
3. Remove the six screws (B-4x6, FL-4x6 and B-3x8) to detach the left side cover.
4. Remove the two SMW-3x6 screws to detach the blind plate.
5. Attach the supplied PCB support plate to the back of the printer with one of the supplied SMW-3x6
screws.
FL-4x6 Screw
B-3x8 Screw
B-4x6 Scre
w
B-4x6 Scre
w
Left Side Cove
r
SMW-3x6
Blind Plate
SMW-3ｘ6 Scre
w
PCB Support Plate