Toshiba B-SX6T Series - Serial Interface Board: B-SA704-RS-QM-R

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33002
5. Serial Interface Board: B-SA704-RS-QM-R
5- 1
5. Serial Interface Board: B-SA704-RS-QM-R
B-SA704-RS-QM-R is an optional expansion I/O board for the B-SX6T/SX8T Series, B-SA4TM/SA4TP and
B-852-QQ/QP-R Series.
• Packing List
The following parts are supplied with the kit. Make sure you have all items shown below.
SIO PC Board (1 pc.)
Serial Interface Cable
Locking Support (1 pc.)
PCB Support Plate (1 pc.)
SMW-3x6 Screw (3 pcs.)
Installation Manual (1 copy)
NOTE: Make sure that the serial interface cable is connected to CN4 on the SIO PC board.
• Installation Procedure
1. Turn the power off.
2. Open the right side cover and top cover.
Top Cover
Right Side Cover