Toshiba B-SX6T Series - Printer Accessories

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33002
3. Ribbon Saving Module: B-SX908-R-QM-R
3- 1
3. Ribbon Saving Module: B-SX908-R-QM-R
B-SX908-R-QM-R is an optional strip module for the B-SX6T Series.
• Packing List
The following parts are supplied with the kit. Make sure you have all items shown below.
Solenoid (R) (1 pc.)
(Connector: White)
Solenoid (L) (1 pc.)
(Connector: Yellow)
RSV PC Board (1 pc.)
Locking Support (3 pcs.)
SM-3x5 Screw (4 pcs.) Installation Manual (1 copy)
• Installation Procedure
1. Turn the power off.
2. Open the right side cover and top cover.
Top Cover
Right Side Cover