Toshiba B-SX6T Series - Printer Appearance

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33002
3. Ribbon Saving Module: B-SX908-R-QM-R
3- 2
3. Remove the two B-4x6 screws to detach the print head front plate.
4. Remove the four SM-4x8 screws to detach the blind plate (R) and blind plate (L).
5. Attach the blind plate (L) to the solenoid (L) with the two SM-3x5 screws.
6. Reverse the blind plate (L) and attach the three locking supports.
B-4x6 Screw
B-4x6 Scre
w
SM-4x8 Scre
w
SM-4x8 Screw
Print Head Front Plate
Blind Plate (R)
Blind Plate (L)
SM-3x5 Screw
Blind Plate (L)
Solenoid (L)
Locking Support