Toshiba B-SX6T Series - Expansion I;O Board: B-SA704-IO-QM-R

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33002
7. Expansion I/O Board: B-SA704-IO-QM-R
7- 1
7. Expansion I/O Board: B-SA704-IO-QM-R
B-SA704-IO-QM-R is an optional expansion I/O board for the B-SX6T/SX8T Series, B-SA4TM/SA4TP
Series and B-852-QQ/QP-R Series.
• Packing List
The following parts are supplied with the kit. Make sure you have all items shown below.
Expansion I/O Board (1 pc.)
See NOTE.
Blind Plate (1 pc.) SMW-3x6 Screw (3 pcs.)
Installation Manual (1 copy) NOTE: Make sure that the interface cable is connected to CN1 on the
expansion I/O board.
• Installation Procedure
1. Turn the power off.
2. Open the right side cover and top cover.
Interface Cable
Top Cover
Right Side Cover