INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO15-33002
6. Real Time Clock: B-SA704-RTC-QM-R
6- 3
5. Attach the real time clock to the printer with the SMW-4x8 screw.
6. Connect the interface cable to CN501 on the MAIN PC board.
7. Attach the left side cover which was removed in Step 3 to the back of the printer. Care must be taken
not to catch the interface cable by the left side cover.
NOTE: When the B-SA704-IO-QM-R expansion I/O board or B-SA704-RS-QM-R serial interface board was
removed beforehand, re-install it.
Real Time Clock
SMW-4x8 Scre
To Next Page
Loading...
