Toshiba BMS-CT1280TU User Manual (English)

Other manuals for Toshiba BMS-CT1280TU

Owner's Manual113 pages

Quick Reference Manual2 pages

Service Manual187 pages

Questions and Answers:

M
murphymichelleAug 31, 2025
Why is the webpage of my Toshiba Controller not displayed?
- K
  Katherine RossAug 31, 2025
  If the Toshiba Controller webpage is not displaying, first ensure the System Controller is powered on. You cannot connect to the webpage if it is off. Also, verify that your PC and the Controller's LAN are properly connected, checking both the LAN cable and network settings. If a proxy server is in use, exclude the IP address of the System Controller. Note that you cannot connect to the Unit unless the IP address of the PC is set.
M
Michael Potter DVMAug 29, 2025
What to do if Toshiba multi outdoor unit's option board control does not work?
- S
  Shannon SmithAug 30, 2025
  When a centralized controller is connected to Toshiba multi outdoor unit, the functions of the outdoor unit's option board become ineffective. Only one of the centralized controller and the outdoor unit's option board can be used.
D
Dana WallAug 28, 2025
How to fix language switch issue with Toshiba Remote Control Software?
- A
  Andrea ThomasAug 28, 2025
  If the language does not switch with the Remote Control Software, ensure that the login user for the Windows being used has write permission for the Remote Control Software storage location. Allow write permission below the folder where Remote Control Software is saved (initial setting: C:\Program Files\TOSHIBA Carrier Corporation). Right-click on the TOSHIBA Carrier Corporation folder, select the [Properties] - [Security] Name, click the "Edit" button and check [Allow] for [Full control] under different settings.
K
Kristen MillerAug 27, 2025
Why Toshiba BMS-CT1280TU LCD does not turn off?
- D
  derekrichardsonAug 27, 2025
  The LCD will still be on when a check code has been detected. Erase the check code.
B
billyfosterAug 27, 2025
Why Toshiba BMS-CT1280TU Controller schedule does not work?
- P
  Parker OnealAug 27, 2025
  If the schedule on your Toshiba Controller is not working, check if the schedule is disabled in the Scheduler Operation settings.
L
laurenchenAug 25, 2025
What to do if the Toshiba BMS-CT1280TU Controller LCD does not display?
- K
  Kathleen PetersenAug 26, 2025
  If the LCD on your Toshiba Controller does not display, check whether the power is turned off by the breaker. Also, check that the wiring of the power outlet and AC adapter is not disconnected. Confirm that the green LED at the lower rear of the main unit and the green LED on the AC adapter are lit, indicating power is being supplied.
C
Charles DickersonAug 25, 2025
How to fix Toshiba Remote Control Software if I cannot start it?
- M
  millershellyAug 25, 2025
  If you cannot start the Remote Control Software, it could be due to several reasons. If "Error 1001" is displayed, download and install .Net Framework 4.6.2 from the software's download website. Ensure the LAN cable is connected and network settings are correct. Verify that the IP address of the access destination is set to the IP address of the controller main unit, not the PC. Also, confirm that the PC on which the software was installed is running Windows 10, as other operating systems may not be supported.