Touch Screen Controller Owner's Manual
31
-EN
1 Display the properties of the network to connect to the System Controller
2 Check "Internet Protocol Version 4 (TCP / IPv4)" and click the [Properties] button
3 Select "Use the following IP address", set IP address to
192.168.2.*** and Subnet mask to 255.255.255.0, and click
the OK button *
* For "***", enter an address different from that of the System Controller to
connect.
If your PC is set to use a proxy server, exclude the IP address of the System Controller.
How to set the IP address of the PC
To Next Page
Loading...
