Toshiba BMS-CT1280TU - Setting Items List

Touch Screen Controller Owner's Manual
67
-EN
Setting items list
Setting Items Setting Procedure
Time setting [Start date]
Tap or flick to change the time.
Day of the week setting [week]
Set the check box(es) of the day(s) of the week on which you want to execute the schedule
to .
● NOTE
The day of the [week] setting is not displayed in Special day schedule.
Operation setting [ON/OFF]
To enable the setting, set the check box of [(1)] to and select a value.
● NOTE
Hot water supply function of the ATW cannot be set to [ON, OFF] by this setting.
Operation mode setting [Mode]
To enable the setting, set the check box of [(2)] to and select a value.
Set temperature setting [Set temp.]
To enable the setting, set the check box of [(3)] to , tap , then change the set
temperature.
Return Back settings [Return Back]
An energy saving function whereby if you temporarily change the set temperature to one
which increases the load, you can automatically return to the energy saving set
temperature after a certain time has elapsed. For example, if you set COOL to 28°C/30
minutes, then if the set temperature is set to below 28°C, the Unit will return to 28°C 30
minutes after the change.
● NOTE
Displayed in the case of a compatible air conditioner.
(1)(1)
(2)(2)
(3)(3)