Toshiba BMS-CT1280TU - Page 69

Touch Screen Controller Owner's Manual
69
-EN
DHW ON/OFF
[DHW ON/OFF]
This setting item is specifically for the Air to Water Heat Pump (ATW) in the hot water
supply function.
To enable this setting, select for the [Enable] check box, and then select [ON, OFF].
● NOTE
Indoor units, ON/OFF units, and the air conditioning function of the ATW cannot
be set to [ON, OFF] by this setting.
ZONE1 Set temp.
[Set temp. ESTIA ZONE1]
This setting item is specifically for the Air to Water Heat Pump (ATW) in the air conditioning
function.
To enable this setting, select for the [Enable] check box, and then tap ▲▼ to change
the set temperature.
The set temperature cannot be changed in increments of 0.5°C.
ZONE2 Set temp.
[Set temp. ESTIA ZONE2]
This setting item is specifically for the Air to Water Heat Pump (ATW) in the air conditioning
function.
To enable this setting, select for the [Enable] check box, and then tap ▲▼ to change
the set temperature.
The set temperature cannot be changed in increments of 0.5°C.
Hot water setting temperature
[Set temp. ESTIA DHW]
This setting item is specifically for the Air to Water Heat Pump (ATW) in the hot water
supply function.
To enable this setting, select for the [Enable] check box, and then tap ▲▼ to change
the set temperature.
The set temperature cannot be changed in increments of 0.5°C.
Setting Items Setting Procedure