Toshiba BMS-CT2560U-E - Page 2

4-
EN
5-
EN
6-
EN
7-
EN
Operation method in units of air conditioner or ON/OFF unit
1 Scroll the home screen and display the air conditioner or
ON/OFF unit that you want to change the settings for
2 Drag or flick the of the corresponding switch
Drag or flick to the right to start operation.
Drag or flick to the left to stop operation.
Ɣ NOTE
You can also start/stop operation by tapping the power icon on the
[CONTROL] tab on the individual control screen displayed by tapping the
switch.
Ɣ NOTE
To change the settings, it is necessary to set to the operation status. (P.31)
Air conditioner unit operation method
1 Scroll the home screen, display the air conditioner you
want to change the settings for, then tap the switch
2 Change settings
No. Name Functions
1
Mode Can be set to [Auto/Heat/Dry/Cool/Fan].
Ɣ NOTE
• A bar is displayed at the bottom of the icon for the currently selected mode.
• Operation modes that cannot be set are not displayed.
2
Wind direction Tap to switch to the following.
Ɣ NOTE
Depending on the connected model, it may not be configurable.
1
3
2
4
Operation Mode Setting Range
Auto (Cool)/Cool/Dry Swing ONĺSwing OFFĺF1ĺF2ĺF3ĺSwing ON
(Return to the beginning)
Auto (Heat)/Heat/Fan Swing ONĺSwing OFFĺF1ĺF2ĺF3ĺF4ĺF5ĺ
Swing ON (Return to the beginning)
Ɣ NOTE
3
Fan Speed Tap to switch to the following.
Ɣ NOTE
Depending on the connected model, it may not be configurable.
4
Set temp. Tap to change the set temperature.
Ɣ NOTE
• If the operation mode is FAN, the temperature cannot be set.
• "Control temp." shows the indoor temperature detected by the indoor unit after partial
compensation.
*Depending on conditions such as the installation site of the indoor unit, it may differ from
actual room temperature.
• In frost protection, preparing for operation, preparing for heating operation, etc., an icon and
a text are displayed in this area.
No. Name Functions
• If there is no corresponding function, that item is not displayed.
Example of a model without a flap
Example of a case in which the wind direction
cannot be changed
Since you cannot set the air direction, it does not change even
if you tap it.
Because the flap is locked, you cannot change the wind
direction even if you tap it.
Example of a model where only a certain fan speed
can be set
Since you cannot change the fan speed, it does not change
even if you tap it.
(1)(1)
(2)(2)
• The warranty period is one year from date of purchase.
About the Warranty
About After-Sales Service
• Please inform us of the following when requesting a repair.
- Customer name
- Address, phone number
- Product model name and serial number
- Installation date
- Failure status (as much detail as possible)
For after-sales service, please contact here.
Contact for after-sales service
1 Tap , then tap [1-(1)]
The contact information is displayed.
1
-(1)
1
-(1)
Customer Memo
It is convenient to fill this in at the time of purchase in case you need to request repair, etc.
Model Name BMS-CT2560U-E / BMS-CT2560U-TR
Installation Date Year Month Day
Name of dealer from whom
you purchased the unit
Phone number
3
4
Basic Usage
Warranty and After-Sales Service
• Before requesting a repair, please check "11 Troubleshooting" of the Owner's Manual. If this does not solve the
problem, immediately shut off the power supply and contact us.
This section explains how to confi gure the basic settings for starting and stopping operation and for air conditioning.
Start/Stop Operation
• For information on the setting of [(1) Lock setting of remote control], refer to "Local Remote Controller Lock" in "7 Various
Functions" of the Owner's Manual.
• For information on the setting of [(2) Option], refer to "Set Operation Details" in "7 Various Functions" of the Owner's Manual.
DEB5869301
Change the Air Conditioning Settings
(P.4)