Toshiba D-VR18DTKB - Language Setting

32
EN
Language Setting
1 Follow steps 1 to 2 in “Pincode
Setting for Adult Lock” on page 31.
2 Select “Language” using [U / D],
then press [ENTER / OK].
3 Select the item by which you want to
change the language using [U / D],
then press [ENTER / OK].
4 Select a language using [U / D],
then press [ENTER / OK].
5 Press [SETUP] to exit.
Note
• The Audio and Subtitle setting may not be available
for some broadcasts.
• To change the audio language, refer to “Multiaudio”
on pages 30 to 31.
• To display the subtitle or choose the subtitle
language, refer to “Subtitle” on page 31.
About
You can check the current DVB system software
version of this unit.
1 Follow steps 1 to 2 in “Pincode
Setting for Adult Lock” on page 31.
2 Select “About” using [U / D], then
press [ENTER / OK].
3 Press [SETUP] to exit.
DVB
Audio : Set the Audio language
Subtitle : Set the Subtitle language
Data Service : Set the Digital Teletext language
DVB Menu
Language
About
Adult Lock
Audio
Subtitle
Data Service
DVB
E9NG1BD_EN.book Page 32 Monday, April 7, 2008 5:54 PM