38
EN
Selecting the Sound Mode
This unit can receive bilingual broadcasts.
You can switch between modes by pressing
[AUDIO ]. Each mode is indicated on the TV.
When you record a DVB channel, only output sound
channel will be recorded.
Setting External Input Audio
When the external input audio is a bilingual
broadcast, you can choose “Stereo” or “Bilingual” to
record on a DVD. This setting is only for recording
external input (AV1/AV2/AV3).
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER / OK].
2 Select “Recording” using [U / D],
then press [ENTER / OK].
3 Select “External Input Audio” using
[U / D], then press [ENTER / OK].
4 Select “Stereo” or “Bilingual” using
[U / D], then press [ENTER / OK].
5 Press [SETUP] to exit.
Hint
• If you select “Stereo”:
The audio will be recorded as “stereo audio”.
• If you select “Bilingual”:
The audio will be recorded as “bilingual audio”. (See
“Setting Bilingual Recording Audio” on this page for
more detail.)
Setting Bilingual Recording Audio
You can select either “Main” or “Sub” audio to record a
bilingual broadcast in Video mode or +VR mode.
This setting is only for recording analogue channel.
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER / OK].
2 Select “Recording” using [U / D],
then press [ENTER / OK].
3 Select “Bilingual Recording Audio”
using [U / D], then press
[ENTER / OK].
4 Select “Main” or “Sub” using
[U / D], then press [ENTER / OK].
5 Press [SETUP] to exit.
Note
• If you are recording onto a VR mode disc, both
“Main” and “Sub” will be recorded regardless of your
setting here. And when you play back, you can
choose either audio format or a combination of both
as your playback audio.
Recording Audio Select (XP)
You can enjoy high quality sound recording. This
function works only when the recording mode is set at
XP.
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER / OK].
2 Select “Recording” using [U / D],
then press [ENTER / OK].
3 Select “Recording Audio Select
(XP)” using [U / D], then press
[ENTER / OK].
DVD-RWDVD-RW
Video
DVD-RWDVD-RW
VR
DVD-RDVD-R D
To Next Page
Loading...
Need help?
General
