Toshiba D-VR600 - Connections with the TV or audio component; Connect to a TV with Audio;Video output; Connect to a TV with S-Video output; Connect to a TV with Component video output

Introduction
17
Connections with the TV or audio component
To Audio (R) input
Audio/video cable (not supplied)
Audio (R) output
To Audio (L) input
Audio (L) output
To Video input
Video output
TV
DVD/VCR
To Audio (R) input
Audio cable (not supplied)
DVD audio (R) output
DVD audio (L) output
S-Video output
To S-Video
input
S-Video cable (not supplied)
To Audio (L) input
TV
DVD/VCR
To Audio (R) input
Audio cable (not supplied)
DVD audio (R) output
To Audio (L) input
DVD audio (L) output
DVD/VCR
Component video cable (not supplied)
Component video output
To Component
video input
TV equipped with
component video
(INTERLACE/
PROGRESSIVE)
inputs
The unauthorized recording, use, distribution,
or revision of television programs, videotapes,
DVDs and other materials, is prohibited under
the Copyright Laws of the United States and
other countries, and may subject you to civil
and/or criminal liability.
The exact arrangement you use to interconnect various video
and audio components to the DVD/VCR is dependent on the
model and features of each component. Check the Owner’s
Manual provided with each component for the location of video
and audio inputs and outputs.
Connect to a TV with Audio/Video output
You can enjoy playback by connecting the unit to a TV.
Connect the unit to a TV equipped with audio input (L/R) and video input jacks using the audio/video cable.
Connect to a TV with S-Video output
If your TV has an S-Video input, you can get higher quality by connecting it with the S-Video output of the unit using
the S-Video cable instead of connecting the video input of the TV to the video output jack of the unit.
Connect to a TV with Component video output
You can enjoy the highest quality picture by connecting the unit’s component video out jacks to the component
video input jacks of your TV with component video cables.
To switch the output signals (Progressive/Interlace):
Press PROGRESSIVE to change the video output signals (480p: progressive and 480i: interlace) from Compo-
nent video output jacks.
NOTES:
• PROGRESSIVE button is not available in VCR mode.
• When the progressive mode is active, the Progressive indicator “
P
” on the display window will light up.
2K70101A_E P12-19 08`02`07, 20:4217