e-STUDIO160/200/250 SPECIFICATIONS 1 - 6 December 2002 TOSHIBA TEC
Fuser unit FUSER-1600-120, FUSER-1600-240 (for e-STUDIO160 series)
FUSER-2500-120, FUSER-2500-240 (for e-STUDIO200/250 series)
Transfer charger unit MAIN-CH-1600
1.4 Replacement Units/Supplies
(1) Replacement units
(2) Process unit
Process unit PU-1610S, PU-1610ES, PU-1610DS, PU-1610DSN, PU-1610CS
1.3 Options
Original cover KA-1600PC, KA-1600PC-N
Paper feed pedestal-1 (PFP) KD-1009, KD-1009-N
Automatic duplexing unit-1(ADU) MD-0101, MD-0101-N
Automatic document feeder (ADF) MR-2012, MR-2012-N
Reverse automatic document feeder-1 (RADF) MR-3011
Paper feed unit (PFU) MY-1015, MY-1015-N
Cassette module (CM) MY-1017, MY-1017-N
(for e-STUDIO200/250 series)
Large capacity feeder (LCF) KD-1010, KD-1010-N
(for e-STUDIO200/250 series)
Paper feed controller (PFC) GH-1030, GH-1030-N
Job separator (JSP) MJ-5001, MJ-5001-N
Offset tray MJ-5002, MJ-5002-N
Stack feed bypass (SFB) MY-1016, MY-1016-N
Printer kit (Printer control) GA-1031
Memory kit GC-1050, GC-1050-N
Fax board kit GD-1061-EU, GD-1061-NA, GD-1061-AU,
GD-1061-SA, GD-1061C
Internet fax kit GD-1070
NIC kit (Network interface card) GF-1110
Staple with surface KK-1600
Finisher MJ-1011
(for e-STUDIO200/250 series)
Toner cartridge T-1600, T-1600E, T-1600D, T-1600C (for e-STUDIO160 series)
T-2500, T-2500E, T-2500D, T-2500C (for e-STUDIO200/250 series)
(3) Supplies
To Next Page
Loading...
