December 2002 TOSHIBA TEC 1 - 1 e-STUDIO160/200/250 SPECIFICATIONS
1. SPECIFICATIONS • ACCESSORIES • OPTIONS • SUPPLIES
1.1 Specifications
• Copy process ................ Indirect electrophotographic process (dry)
• Type............................... Desktop type (console type when the paper feed pedestal and Large
capacity feeder are installed)
• Original table ................. Fixed table (the left rear corner used for standard original placement)
• Acceptable originals ...... Type: sheet, book, and 3-dimensional object.
However, the automatic document feeder (option) only accepts sheets of
paper (Multi-sheet: 50 - 105 g/m
2
, or 13 - 29 lb/Single-sheet: 105 - 127
g/m
2
, or 29 - 34 lb.), excluding carbon paper, pasted sheets and stapled
sheets.
Max size: A3/LD
• Copy speed
e-STUDIO160 series (Copies/min.)
Upper PFU PFP LCF Bypass feeding (SFB)
cassette Upper Lower cassette No paper size Paper size
cassette (with CM) designated designated
A4, LT 20 20 20 20 20 12 20
A4-R 16 16 16 16 - 12 16
LT-R 17 17 17 17 - 12 17
B4 14 14 14 14 - 12 14
LG 14 14 14 14 - 12 14
A3, LD 12 12 12 12 - 12 12
Paper
size
Paper
supply
e-STUDIO200 series (Copies/min.)
Upper PFU PFP LCF Bypass feeding (SFB)
cassette Upper Lower cassette No paper size Paper size
cassette (with CM) designated designated
A4, LT 16 16 16 - - 9 16
A4-R 12 12 12 - - 9 12
LT-R 13 13 13 - - 9 13
B4 11 11 11 - - 9 11
LG 11 11 11 - - 9 11
A3, LD 9 9 9 - - 9 9
Paper
size
Paper
supply
To Next Page
Loading...
