December 2002 TOSHIBA TEC 14 - 1 e-STUDIO160/200/250 FUSER UNIT/EXIT UNIT
14. FUSER UNIT/EXIT UNIT
14.1 General Description
The fuser unit applies heat and pressure to a toner image formed on the paper to fix it to the paper.
The paper exit unit transports the paper, for which the fusing process has ended, to the paper tray cover.
14.2 Construction
The fuser unit consists of the following parts:
• Heater lamp
• Heater roller
• Pressure roller
• Separation claw
• Cleaner fuser roller
• Heater thermistor
• Fuser thermostat 1/2
The exit unit consists of the following parts:
• Exit roller
• Pinch roller
• Exit guide
• Exit sensor
14-02-01
Heater roller
Exit unit
Exit guide
Exit sensor
Fuser unit
Pressure roller
Cleaner fuser roller
Heater lamp
Exit roller
Pinch roller
Fuser thermostat 1
Heater thermistor
Separation claw
Fuser thermostat 2
To Next Page
Loading...
