e-STUDIO160/200/250 OUTLINE OF THE MACHINE 2 - 34 December 2002 TOSHIBA TEC
Screw
FUS PWA cover
CN111
CN110
Locking support
FUS PWA
028-1
028-2
Fig. 2-6-33
5. Detach all the connectors from FUS PWA.
6. Release 4 locking supports and remove FUS
PWA.
Fig. 2-6-34
[F] FUS PWA
(SAD/ASD/AUD/CND models)
1. If a STP (KK-1600) is attached to the copier,
disconnect the power cable.
2. Detach the manual pocket.
3. Detach rear cover. (See Fig. 2-6-1)
4. Remove one screw and detach FUS PWA
cover. (SAD/ASD/AUD/CND models)
SAD/ASD/AUD/CND models
To Next Page
Loading...
