Toshiba E-STUDIO 2020AC - The Equipment Does Not Shift into the Energy Saving Mode When the Motion Sensor Is Enabled

1.QUESTIONS FOR EQUIPMENT
16 Questions for Equipment
 The equipment does not shift into the energy saving mode when the motion sensor is
enabled.
Even if the conditions for shifting into the energy saving mode have been met, the timing will be extended by one
minute when the motion sensor is responding.
If the equipment does not shift into the energy saving mode, carry out the following actions.
 Adjust the sensing range to be closer by means of the motion sensor lever. For details, see the reference below:
Information About Equipment - Information About Equipment - Description of Components
 Disable the motion sensor. For details, see the reference below:
User Functions - SETTING ITEMS (Admin) - General - Setting the energy saver modes