8.QUESTIONS FOR NETWORK
54 Questions for Network
Printing in a UNIX/Linux environment has failed.
Take the appropriate actions by following the checklist below. If the problem still persists, contact your service
representative.
No. Check... Yes No Corrective Action
1 Are the IP address properties specified
correctly?
Next
Step
↓
→ Specify the IP address correctly.
2 Is LPR/LPD print specified correctly? Next
Step
↓
→ Specify the LPD print service correctly on
TopAccess.
3 Has the installation of the UNIX/Linux
filters succeeded?
Next
Step
↓
→ Reinstall the UNIX/Linux filters.
4 Has the print queue been created and
configured properly?
Next
Step
↓
→ Recreate the print queue.
5 Can printing be carried out to the
equipment using LPD as the root?
Next
Step
↓
→ Specify the UNIX/Linux access of the
equipment to enable other users to
perform printing from Bourne shell. For
more detailed information, refer to the
UNIX/Linux document.
6 Is it possible to execute the ping
command to the equipment from your
computer?
Next
Step
↓
→ Execute the ping command from another
server remotely. If the equipment can be
located from the server, check whether or
not the segments between the equipment
and the current network match.
7 Is LP Daemon functioning? End → Reload Daemon or restart the system.
Then check that printing can be
performed by means of the equipment.
To Next Page
Loading...
