Installing the Printer on Mac OS X 10.2.4 to Mac OS X 10.4.x 153
- Device URI: https://<IP address>:443/Print
- Printer Model: TOSHIBA
- PPD: TOSHIBA e-ST450/452 Series PS (or UK PS)
TOSHIBA e-ST280/282 Series PS (or UK PS)
4
Click [Add].
y The Installable Options window appears.
5
Set the following options.
y Finisher
Not Installed — Select this if a finisher is not installed.
Single-Position Stapler — Select this when the Hanging Finisher is installed.
Multi-Position Stapler — Select this when the Finisher or Saddle Stitch Finisher is
installed.
Multi-Position Stapler and Hole Punch — Select this when the Finisher or Saddle
Stitch Finisher and Hole Punch unit are installed.
Job Separator — Select this when the Job Separator is installed.
Offset Stacker — Select this when the Offset Stacker is installed.
To Next Page
Loading...
