Monitoring Print Jobs with TopAccessDocMon 363
Configuring Network Discovery Settings
You can configure the discovery settings for the Network Discovery in the Discovery Settings
dialog box.
1) Devices - Find TOSHIBA Devices
Check on this to search only for TOSHIBA devices in your network, such as the
e-STUDIO3510c Series, e-STUDIO451c Series, e-STUDIO850 Series, e-STUDIO452
Series, e-STUDIO282 Series, e-STUDIO4511 Series, e-STUDIO450 Series, e-STUDIO280
Series, GL-1020, GL-1010 and SC-2.
2) Devices - Find All Devices on the Network
Check on this to search for all compatible devices can be detected.
3) Network - Enable IPX/SPX Search
Check on this to search for printers connected to the IPX/SPX network. This is available
only when the IPX/SPX protocol and Novell Client are installed in your computer, and the
computer is connected to the NetWare server.
4) Network - Enable TCP/IP Search
Check on this to search for printers connected to the TCP/IP network. This is available only
when the TCP/IP protocol is installed in your computer.
When this is enabled, select how TopAccessDocMon should search for printers in the TCP/
IP network.
- Search local subnet — Select this to search for printers in local subnet.
- Specify a range — Select this to search for printers in a specific range of IPv4
addresses or IPv6 addresses. When this is selected, enter the IP addresses in the
“From” field and “To” field to specify the range.
— Monitoring Queues
Each of the TopAccessDocMon job status tabs display essentially the same information.
The Queue tabs on the TopAccessDocMon window are vary depending on the monitoring
device:
e-STUDIO3510c Series, e-STUDIO451c Series, e-STUDIO850 Series, e-STUDIO452 Series,
e-STUDIO282 Series, e-STUDIO4511 Series, e-STUDIO450 Series, and e-STUDIO280
Series — Print Queue, Private Print, Proof Print, Scheduled Print, Fax, e-Filing, and Invalid
GL-1020 — Print Queue, Private Print, Proof Print, Scheduled Print, Fax, TopAccessComposer,
and Invalid
GL-1010 — Print Queue, Private Print, Proof Print, Scheduled Print, Fax, TopAccessComposer,
and Invalid
SC-2 — Device Status, Print Queue, Private Print, and Proof Print.
Job status information
y Document Name — is the name of the document that is printing.
To Next Page
Loading...
