Printing from Application on Mac OS X 10.2.4 to Mac OS X 10.4.x 291
- Middle Bottom (Portrait)/Middle Left (Landscape) — Select this to staple double in the
bottom for the portrait document, or in the left for the landscape document.
- Saddle Stitch (Portrait)/Saddle Stitch (Landscape) — Select this to staple double in
the center for a booklet to be printed. Select this only when booklet printing is performed.
y This option cannot be selected if a finisher is not installed.
y “Saddle Stitch (Portrait)/Saddle Stitch (Landscape)” can be selected only when the Sad-
dle Stitch Finisher is installed.
— Booklet
In the Booklet menu, you can set booklet printing.
1) Booklet Paper Size
Select a paper size for the booklet. Each two pages are printed on both side of a sheet
which is then folded. The booklet size will be the half size of the paper size that you specify.
2) Left to Right Page Layout
Check this to create a booklet can be read from left to right.
3) Booklet Center Margin
Select the width of space added to the center.
1
2
3
4
To Next Page
Loading...
