Monitoring Print Jobs with TopAccessDocMon 359
Adding new device by searching the printer automatically
1
Click [Add Device] in the Device Status tab.
y The TopAccessDocMon Network Discovery dialog box appears.
2
Click [Start Discovery] to begin the process.
y TopAccessDocMon locates the compatible printers in your network.
y You can quit the process by clicking [Stop Discovery].
y It may not find the device that is located in the different segment. If a device cannot
be found, find a device manually from the [Manual Selection] button.
P.361 “Adding new device by entering the printer address manually”
To Next Page
Loading...
