1 TROUBLESHOOTING FOR THE HARDWARE
34 Clearing a Paper Misfeed
Paper misfeed in the Saddle Stitch unit (optional)
The Saddle Stitch unit is inside the Saddle Stitch Finisher MJ-1106.
6
Connect the finisher to the equipment.
Move the finisher slowly toward the equipment, placing both of your
hands on the front and the back of the finisher.
1
Remove the misfed paper from the exit side of the
Saddle Stitch unit.
2
Open the front cover of the finisher.
3
Holding the green knob, move the guide to the right.
4
Raise the lever and open the upper receiving tray of
the finisher.
To Next Page
Loading...
