1 TROUBLESHOOTING FOR THE HARDWARE
64 Cleaning the Slit Glass and Main Chargers
5
Carefully insert the cleaner straight all the way in, and
then pull it back out. Repeat this a couple of times for
each color.
y For yellow: insert the cleaner until the arrow mark on the
cleaner is hidden.
y For the other colors: insert the cleaner until it stops on the line
next to the point of the arrow.
6
Mount the white cap.
Do not touch the slit glass cleaner pad, the toner on the pad may
stick to your hands and the cleaner pad may be stained.
7
Attach the cleaner to the front cover.
Check that the cleaner is securely held by the latch.
2
1
To Next Page
Loading...
